Send Message
Home > products > Electrical Welding Machine >
Hwashi 2000kg Electrical Welding Machine Suitable For Copper Wire

Hwashi 2000kg Electrical Welding Machine Suitable For Copper Wire

electric welding machine

electric welding equipment

Hwashi Electrical Welding Machine

Place of Origin:


Brand Name:




Model Number:


Contact Us

Request A Quote
Product Details
Product Name:
Electrical Welding Machine For Welding And Cutting Of Copper Braided Wire
Welding And Cutting Copper Braided Wire
12 Months
Service Life:
8-10 Years
Payment & Shipping Terms
Minimum Order Quantity
1 set
Packaging Details
sea worthy wooden package
Delivery Time
7-30 working days after received your payment
Payment Terms
L/C, T/T
Supply Ability
50 sets per month
Product Description

Electrical Welding Machine for Welding and Cutting of Copper Braided Wire




This machine is designed to complete the process of welding and cutting automatically as per customer requirement.


The shape of welding and length of cutting could be adjusted through program. The welding length is 60-100mm (adjustable). It can weld 4- 14 wires. The dimension of welding (width and length) is maximum 8x10mm and minimum 4x4.5mm (adjustable).


Through the feeding system-wire output wheel, the braid wire enters into the welding center to complete the process of feeding wire. Then the wire output system stop working, the welding forming device start working to press the wire on the preset position. The cylinder will press down to complete the welding. Next, the stay wire cylinder start to output the wire to preset length. When reaching the preset value, the cutting device starts cutting the wire. At last, the stay wire cylinder starts to pull out the completed wire and put it into the discharging box.



  1. The key point of design is the welding power source. Since area of the wire after welding is large, the three-phase secondary rectifying power source is adopted to ensure the stability of welding. It can output direct current to weld.
  2. The slide way is controlled by the feeding cylinder. The speed of feeding is adjustable while the feeding length could be adjusted randomly through setting the magnet switch.
  3. It contains 14 sets of material feeding plate at most. They could be used randomly according to the requirement of product. The only thing that needs to be done is to adjust the parameter.
  4. Adopt digital PLC control wiring. It is equipped with double functions of automatic protection and correcting. It makes the quality of product stable, reliable and precise in order to ensure the process of full automatic welding.
  5. The max stay wire length is 100mm. The blade adopts cylinder direct drive operation mode.
  6. There is voltage compensation function built-in in the control circuit to ensure the fluctuation of power is within the range of ±15%. It will compensate the current immediately to ensure the stability of welding current.
  7. Good human-machine connector to make the operation interface simple and clear.
  8. There is automatic failure alarming procedure built-in in the system to ensure the percent of pass of product.
  9. Water cooling function can prolong the service life of welding tip so as to guarantee the quality of product.



No. Item Parameter
1 Input Voltage 380V Three-Phase
2 Input Current 310A
3 Output Voltage DC11.6V
4 Max Short Circuit Current 40000A
5 Welding Models 16 Kinds
6 Amount Of Material Feeding Plate 14 Sets
7 Cutting Length 60-100mm
8 Max Welding Forming Dimension 8x10mm
9 Min Welding Forming Dimension 4x4.5mm
10 Feeder Movement Speed 0.5m/Sec
11 Welding Cylinder 80x2x80mm






Welding of braid wire of electrical parts like distribution switch, disconnector, etc. Be able to weld and cut 1 to 25 mm2 of singlet wire, double wire, and three-wire in one of annealed copper wire.


The cutting length could be adjusted freely and the cross-section of connecting wire could be designed as different shapes like semi-circle, square, and hexagon, etc.





1. HWASHI is the leading brand in resistance welding industry in China for 20 years; Factory direct sale, competitive price.

2. Customized Service: We can help to design and develop the welding machine according to your requirement. We are flexible and capable Supplier.

3. Genuine Product with Excellent Quality:  12 months warranty. Our machines are strictly complied with ISO9001:2000 and China Compulsory Certification. Most of our machines enjoy 8-10 years service life. 100% guarantee test before delivery.

4. After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.

5. Quick Delivery: Our company provides just-in-time delivery.

6. Prompt Response to Customers: Your satisfaction is the goal we pursue.




          Hwashi 2000kg Electrical Welding Machine Suitable For Copper Wire 0



               Hwashi 2000kg Electrical Welding Machine Suitable For Copper Wire 1

        Hwashi 2000kg Electrical Welding Machine Suitable For Copper Wire 2

Hwashi 2000kg Electrical Welding Machine Suitable For Copper Wire 3






Send your inquiry directly to us

Privacy Policy China Good Quality Capacitor Discharge Welding Machine Supplier. Copyright © 2016-2024 . All Rights Reserved.